Weightlifting Set Training (190 Kg Mens - 185 Kg Women's) - Men (190 kg) Subtotal: ₹56,230.00
India’s No.1 Weightlifting Set, ATE is one of the oldest manufacturers of weightlifting sets in India. All our barbells are made at the ATE Factory India. All our competition plates are also made at the ATE factory. Our competition plates have a steel hub in the center that gives it tremendous strength. ATE Weightlifting Set comes with lifetime Warranty when used with the ATE Weightlifting Training Platform.
We are one of the oldest manufacturers of weightlifting and cross-fit barbells in India. All our barbells are made at the ATE Factory India. Our olympic barbells are widely used in various competitions and is one of the most trusted olympic barbells in the world. Our Olympic Barbell 20Kg comes with lifetime warranty against bending. The olympic barbell 20kg has a hard chrome finish. ATE Magnum Barbell has a proprietary black oxide finish and comes in various different lengths.
Weightlifting
Showing all 28 results
-
Accessories
Weightlifting Olympian Plate Tree
The simple, old-school plate tree is still the gold standard when it comes to efficient bumper storage at affiliates and garage gyms around the globe. That said, there’s always room for a little refinement.
Compatible with any and all IWF standard Olympic plates, the Olympian Plate Tree 2.0 is equipped with six 12” long storage posts (three on each side). Each of the posts on the roughly four-foot tall tree are evenly spaced at 18.275″ on center to offer a good mix of versatility and storage capacity.
*Please note that any metal-to-metal contact with the coated storage posts (such as adding and/or removing plates) may cause wear on the finish over time.*
SKU: n/a -
Best Sellers, Plates and Collars
Black Bumper Plates 3.0
The ATE Black Bumper Plates 3.0 are an improved version over the previous 2.0 generation. These new bumper plates have low bounce and great impact absorbing due its construction from very high-quality natural rubber.
The ATE Black Bumper Plates are manufactured with IWF Standard specification, i.e. 450mm in diameter & 50.4mm collar opening with hardened stainless steel insert which helps increases the durability of your bumpers & keeps your plates firmly in place even during intense training.
The design includes a thicker raised flanges around the edge that helps to firmly grip the plates. Also, the thin design of the plates enables you to load more plates on the barbell.
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Best Sellers, Plates and Collars
Bumper Plates Color 3.0
The ATE Color Bumper Plates 3.0 are an improved version over the previous 2.0 generation. These new bumper plates have low bounce and great impact absorbing due its construction from very high-quality natural rubber.
The ATE Color Bumper Plates are manufactured with IWF Standard specification, i.e. 450mm in diameter & 50.4mm collar opening with hardened stainless steel insert which helps increases the durability of your bumpers & keeps your plates firmly in place even during intense training.
The design includes a thicker raised flanges around the edge that helps to firmly grip the plates. Also, the thin design of the plates enables you to load more plates on the barbell. Colour coded as per IWF rules.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Plates and Collars
Change Plates Fractional
Small weight changescan mean the difference between matching a record or for setting a new one for professional weightlifters. The ATE fractional change plates are great by allowing for a lesser weight increase. A tiny increase in weight results in a huge growth over time and the change plates play an essential role in that. The change plates are available in the following weights: 0.5kg, 1kg, 1.5kg and 2kg and are manufactured of an Eco-friendly rubber with a gloss-matte-gloss finish. Colour coded as per IWF standard.
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Plates and Collars
Competition Collar Weightlifting
What are competition collars? Competition collars are used in professional weightlifting due to its robust solid cast iron construction and extremely high load bearing capacity. These collars are extremely reliable while lifting heavy weights, thus giving you the peace of mind while you make your PR’s!
The ATE Competition Weightlifting Collars consists of a set of 2 Pcs. The total weight of two collars is 5.0kg with each weighing 2.5kg. The collar is weight calibrated and casted out of pure cast iron which is then precision machined to desired specification that ensures flawless surface. The long handle makes fastening the collars to the bar effortless.
(SOLD IN PAIRS)
SKU: n/a -
Best Sellers, Plates and Collars
Competition Colour Plates 2.0
The ATE competition plates are as IWF standard 450 mm in diameter. The construction of the ATE Competition Rubber Plates makes our plates high performance & durable which contains scratch resistant rubber & rust resistant Zinc Plated Steel Disc Insert with Zinc-plated Steel bolts to attach the steel center disc to the rubber itself. Specially designed grip for effortless loading and unloading. Raised lettering for a clean bold look. Manufactured at the ATE factory, India.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Barbells, Best Sellers
Olympic Barbell Weightlifting 15kg (Women’s)
The ATE Weightlifting competition olympic barbell is made from a special steel alloy. It comprises of the ATE unique bearing system with 8HK Needle Bearings.
- Strength rating at 200,000 PSI
- Weight – 15 kg
- Grip – 25 mm
- Sleeve diameter – 50mm
- Length – 2.01 meters
- 1.2mm Diamond Knurl
- Single IWF Knurl Mark
- Good Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: 2001207 -
Barbells, Best Sellers
Olympic Barbell Training 20kg
Looking for a high quality bar for gym and home use?
The ATE Olympic Barbell Training 20Kg is the perfect bar for home/gym use. With 350Kg weight capacity, the ATE Training Bar can easily withstand constant bench press, deadlifts and squat sessions!
The 8 Self-Lubricating Bronze Bushings give a moderate spin, enabling the bar to be used even in weightlifting sessions!
- Strength rating at 100,000 PSI
- Load Capacity – 350kg
- Weight – 20 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 2.20 meters
- 1.2mm Diamond Knurl
- Dual IWF + IPF Knurl Mark
- 8 Self-Lubricating Bronze Bushings
- Moderate Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: 2001202-1 -
Barbells, Best Sellers
Olympic Barbell Weightlifting 20kg (Men’s)
The ATE Weightlifting Competition Olympic Barbell is made from a special steel alloy. The ATE Olympic Barbell 20kg is made as per IWF Specifications and has lifetime warranty on bending. Our bars are used in various national, government centers and international competitions.
Read the full review of the ATE Competition Olympic Barbell 20kg!
The bar comprises of the ATE unique ball bearing system with 10HK Ball Bearings. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Strength rating at 200,000 PSI
- Weight – 20 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 2.20 meters
- 1.2mm Diamond Knurl
- Single IWF Knurl Mark
- 10 HK Needle Bearings
- Good Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: 2001202 -
Barbells, Best Sellers
Olympic Barbell Weightlifting Eagle Bar 20kg (Black Oxide/Chrome)
Looking for a great budget barbell for personal/gym use? Check out the ATE Eagle Bar which comes with lifetime warranty against bending, 4 HK Needle Bearings and the ATE quality!
The ATE Eagle Barbell has a Black Oxide finish on the shaft and Hard Chrome Finish on the sleeves. Black Oxide coating is durable, rust resistant and gives a bare metal feel to the knurl. Although,
It comprises of the ATE unique ball bearing system with 4 HK Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Black Oxide Finish
- Strength rating at 190,000 PSI
- Weight – 20 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 2.20 meters
- 1.2mm Diamond Knurl
- Dual IWF + IPF Knurl Mark
- 4 HK Needle Bearings
- Moderate Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Barbells, Best Sellers
Olympic Barbell Weightlifting Eagle Bar 20kg (Gold Edition) (Black Oxide/Gold)
Barbells, Best SellersOlympic Barbell Weightlifting Eagle Bar 20kg (Gold Edition) (Black Oxide/Gold)
Looking for a great budget barbell for personal/gym use? Check out the ATE Eagle Bar (Gold Edition) which comes with lifetime warranty against bending, 4 HK Needle Bearings and the ATE quality!
The ATE Eagle Barbell has a Black Oxide finish on the shaft and Gold Chrome Finish on the sleeves. Black Oxide coating is durable, rust resistant and gives a bare metal feel to the knurl.
It comprises of the ATE unique ball bearing system with 4 HK Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Black Oxide Finish
- Gold Chrome Sleeves
- Strength rating at 190,000 PSI
- Weight – 20 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 2.20 meters
- 1.2mm Diamond Knurl
- Dual IWF + IPF Knurl Mark
- 4 HK Needle Bearings
- Moderate Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Barbells, Best Sellers
Olympic Barbell Weightlifting Hummingbird 15kg (Cerakote)
The ATE Hummingbird Weightlifting Olympic Barbell is made from a special steel alloy. The ATE Hummingbird Barbell has a Cerakote Red finish on the shaft and Black Finish on the sleeves. Cerakote coating is highly durable and rust resistant. If you live in a coastal area with high humidity, the Cerakote finish is ideal for your use.
It comprises of the ATE unique ball bearing system with 8HK Ball Bearings. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Cerakote Red Finish
- Strength rating at 200,000 PSI
- Weight – 15 kg
- Grip – 25 mm
- Sleeve diameter – 50mm
- Length – 2.01 meters
- 1.2mm Diamond Knurl
- Dual IWF5 + IPF Knurl Mark
- 8 HK Needle Bearings
- Good Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Barbells, Best Sellers
Olympic Barbell Weightlifting Red Falcon 20kg (Cerakote)
The ATE Red Falcon Weightlifting Olympic Barbell is made from a special steel alloy. The ATE Red Falcon Barbell has a Cerakote Red finish on the shaft and Black Finish on the sleeves. Cerakote coating is highly durable and rust resistant. If you live in a coastal area with high humidity, the Cerakote finish is ideal for your use.
Checkout the review of the ATE Red Falcon Bar 20Kg here!
It comprises of the ATE unique ball bearing system with 10HK Ball Bearings for smooth rotation while lifting. This bar is our incredible deal for CrossFit boxes, Conventional gyms and Olympic weightlifting gyms.
- Cerakote Red Finish
- Strength rating at 200,000 PSI
- Weight – 20 kg
- Grip – 28 mm
- Sleeve diameter – 50mm
- Length – 2.20 meters
- 1.2mm Diamond Knurl
- Dual IWF5 + IPF Knurl Mark
- 10 HK Needle Bearings
- Good Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Barbells, Best Sellers
Powerlifting Barbell 20kg (IPF Specifications)
The ATE powerlifting barbell is made from special steel alloy. The ATE Powerlifting Barbell is made according to IPF Specifications and thus is used in professional powerlifting setups all over the country.
You can read the full review of the ATE Powerlifting Barbell 20kg India!
The 1.5mm Volcano Knurl with the IPF knurl mark makes the ATE Powerlifting Barbell suitable for all national competitions and training. It comprises of the ATE signature bushing system.
- Weight – 20 kg
- Grip – 29 mm
- Sleeve diameter – 50mm
- Length – 2.20 meters
- 1.5mm Volcano Knurl
- Single IPF Knurl Mark
- 6 Bronze Bushings
- Medium Whip
*Tested using ATE Competition Coloured Plates with the ATE Weightlifting Training Platform as the testing surface. Warranty only applicable if used with authentic ATE products.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: 2001204 -
Pull and Jerk Box
Pull and Jerk Box
The ATE pull and jerk boxes are built from sturdy steel tubing and extra bracing in the centre for added durability. The robust design withstands barbell release from overhead, and the boxes are rubber lined to minimise impact and protect equipment. The boxes are designed for developing technique and performing skill work such as jerks and elements of other lifts from a high fixed height.
Price is of one pair (2 Pcs.)
Price is excluding GST and Shipping
SKU: 3300007 -
Squat Stand
Squat Stand
The ATE Squat Stand delivers much of the strength and versatility of a power rack in an efficient, compact frame. The ATE squat stand is a very heavy duty squat stand made of high quality steel and is tested for weight upto 300 kg. Knock down design for easy transportation. Gauge 12 construction. Easy knockdown design and our compact packaging allows our customers to easily assemble our ATE Squat Stand within 15 minutes.
(PRICE IS EXCLUDING GST AND SHIPPING)
*Ships without the barbell and weights.
SKU: 3300002 -
Barbells
Olympic Weightlifting Technique Barbell 10kg (Kid’s)
ATE technique weightlifting barbell is ideal for beginners. Sturdy Nylon bushings and the bar’s design allow sleeves to rotate freely giving the feeling of lifting with an ATE Olympic Weightlifting Bar. This enables a smooth transition and appropriate progressions to heavier standard weightlifting bars. Sleeves are made of anodised aluminium.
- Weight – 10 kg
- Grip – 25 mm
- Sleeve diameter – 49.8mm
- Length – 2200mm
- Single IWF Knurl Mark
- 1.0mm Mild Knurl
- 4 Nylon Bushings
- Low Whip
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: 2001212 -
Accessories
Barbell Lifter Weightlifting
ATE weightlifting barbell lifter is a compact and lightweight product offering by us here at ATE. The ATE barbell lifter is made of heavy-duty steel construction with red powder coating for increased durability. The angle formed by the lifter and the floor helps absorb pressure using simple physics. The simple and compact design allows the user to effortlessly change the plates fast during competitions and training.
(PRICE IS WITHOUT SHIPPING AND GST)
SKU: n/a -
Accessories
Weightlifting Plate Stand Tree
The ATE weightlifting plate stand offers robust and compact way to store all the weight plates efficiently be it the gym or your home. The innovative design and robust construction helps the stand to take in more weight, being a relatively compact design.
Suitable for storage of change/fractional plates of 0.5kg, 1kg, 1.5kg, 2kg. Cannot store olympic size plates i.e. 450mm diameter. Checkout the ATE Olympian Plate Tree if you’d like to get a stand for olympic size plates.
SKU: 3300004 -
Weightlifting Platform
Weightlifting Platform Competition
ATE’s newest Weightlifting Competition Platform debuts a new construction with a reduced number of planks, a design that simplifies assembly and ensures the platform comes together seamlessly to create our best platform yet. High-quality hardwood beams provide a more robust and stable lifting surface. The wooden deck is finished using a special process to maximize durability and traction while also minimizing signs of heavy use providing lifters with the best lifting surface. Platform corners have been fine-tuned and updated with a rich charcoal surface finish giving the platform an appealing modern aesthetic.
SKU: 2101213 -
Weightlifting Platform
Drop Bags with Center Platform
The ATE Drop Bags are designed to make it easier for home and commercial gym owners to execute overhead dropping without causing any noise disruption to their family or neighbours. Anti-Rip casing guarantees your floor protection (particularly when home gym training) while supplementary prolongs the life of your equipment like the barbell, plates, and dumbbells during heavyweight droppings with a heavy-duty bonded foam cased with tear & ripping resistant fabric. The ATE Drop Bags are a cost-effective and compact alternative to ATE platforms.
TESTED AT 300KG DYNAMIC LOAD!
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Weightlifting Platform
Weight lifting Platform Training (2.5m x 3m x 25mm)
The ATE weightlifting platform training has a measurement of 3 m x 2.5 m. 25 mm thick, high impact rubber tiles with plywood sheet ensures durability during weight training. The deck is durably constructed with 3 layered waterproof Birch ply which makes a sturdy base & also application of PU coat over the surface of ply enhances the visual appeal and life of the platform. The heavy-duty rubber mats complete the platform with an exceptionally durable, odor-free lifting zone. Simply this platform achieves the desired aspect of creating a joyful and inviting deadlifting area with eliminating the risk for breaking of your floor.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: 2101212 -
Weightlifting Platform
Weightlifting Platform Basic (7.85 ft. x 5 ft. x 25mm)
The ATE weightlifting platform basic has a measurement of 7.85 ft x 5 ft x 25 mm. The birch plywood sheet provides durability during weight training thanks to the thick, high-impact rubber tiles. The deck is made of three layers of waterproof Birch ply, which provides a strong foundation, and a PU finish applied to the surface of the ply extends the platform’s visual attractiveness and longevity.
The heavy-duty rubber mats provide a long-lasting, odor-free lifting zone to the platform. Simply said, this platform accomplishes the goal of providing a fun and attractive deadlifting and weightlifting environment while reducing the chance of your floor breaking.
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Weightlifting Platform
Weightlifting Platform Pro (7.85 ft. x 5 ft. x 35mm)
The ATE weightlifting platform pro has a measurement of 7.85 ft x 5 ft x 35 mm. The birch plywood sheet provides durability during weight training thanks to the thick, high-impact rubber tiles. The deck is made of three layers of waterproof Birch ply, which provides a strong foundation, and a PU finish applied to the surface of the ply extends the platform’s visual attractiveness and longevity.
The ATE pro platform has been manufactured with an ability for the substantial absorption of shocks and vibrations by featuring the drop zone with 35mm thick heavy-duty rubber tiles braced by a 35 x 35mm 11-Gauge CR Steel Frame kit hence eliminating the worry of banging weights.
The heavy-duty rubber mats provide a long-lasting, odor-free lifting zone to the platform. Simply said, this platform accomplishes the goal of providing a fun and attractive deadlifting and weightlifting environment while reducing the chance of your floor breaking.
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Best Sellers, Weightlifting Set
Weightlifting Set Competition (190 Kg Mens – 185 Kg Womens)
The ATE Weightlifting Set is the best set available on the market. Our Weightlifting Set ships with ATE Olympic barbell 20Kg/15Kg with a strength rating of 200K PSI. Our ATE Olympic weightlifting barbell is made from a special steel alloy and comprises of the ATE unique ball bearing system. Strength rating at 200,000 PSI. The plates are made in house to assure that a high quality product is being produced. Ships out with ATE Competition Collars and change plates.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Best Sellers, Weightlifting Set
Weightlifting Set Training (190 Kg Mens – 185 Kg Women’s)
The ATE Challenger weightlifting set is the best set for training available on the market. It ships with ATE Olympic barbell 20Kg/15Kg with a strength rating of 200K PSI. The ATE Olympic weightlifting barbell is made from a special steel alloy. It comprises of the ATE unique ball bearing system. Strength rating at 200,000 PSI. The plates are made in house to assure that a high quality product is being produced. Mostly used in training scenarios.
No Cost EMI Available at Checkout
(PRICE EXCLUSIVE OF GST AND SHIPPING)
SKU: n/a -
Weightlifting Tiles
Weightlifting Tiles
Crumb rubber tiles are great for protecting your floor and equipment during strength training. Natural rubber mats are more durable than crumb rubber tiles, but have comparatively lower shock absorption.
We have used high quality binders and pigments in addition to recycled SBR rubber in the manufacturing process, making the ATE tiles more durable than most conventional rubber tiles on the market. If you are looking for excellent shock absorption, you should choose these tiles over natural rubber mats. In addition, the tiles are made from polymer-bonded styrene-butadiene rubber granules using a hot moulding process. The rubber tiles are great for protecting your floor and equipment during strength training.
Shock absorption, noise and vibration reduction and cost effectiveness are the key features that make the ATE crumb rubber tiles an excellent choice for most commercial gyms, CrossFit gyms and weight training centres.
- Size – 500mm x 500mm x 25mm
- Area covered per tile – 2.69sqft | 0.25sqm
- Material – Crumb SBR
- Durable crumb rubber construction
- Excellent shock absorption properties
- Reduces wear and tear of your strength equipment and protects floors
- Reduces noise and vibrations of drops
SKU: 2101214
