- Description
- Additional Information
- Reviews
- FAQ
ATE Sled Turf Track: 15 mm Short-Pile Turf for Sled Push, Pull and Sprint Lanes
“Roll It Out. Load the Sled. Push.”
What is the ATE Sled Turf Track? It is a 15 mm short-pile synthetic turf lane from ATE for indoor sled push and pull, sprints and functional training. It needs no sand or rubber infill, comes in four roll sizes from 1 × 12.5 m to 2 × 25 m, and can be loose-laid or glued down. It suits home gyms, PT studios, commercial gyms and performance centres, with a 1-year warranty, pan-India delivery and EMI.
The ATE Sled Turf Track is a short-pile synthetic turf lane made for pushing and pulling loaded sleds indoors. Its dense 15 mm pile lets sled skids glide with steady, predictable drag, and a three-layer backing of PP cloth, mesh and SBR latex holds the fibres in place.
It needs no sand or rubber infill, so there is nothing to top up or sweep out of the gym, and the same lane doubles as a surface for sprint starts, agility drills, lunges, crawls and warm-ups. Choose from four roll sizes in 1 m and 2 m widths, then loose-lay it for a home gym or glue it down for a busy commercial floor.
Key Features of the ATE Sled Turf Track
15 mm Short Pile
A low, dense pile gives sled skids a smooth, consistent surface to run on, without the heavy drag of long-pile landscape turf.
No Infill Needed
The fibres stand on their own, so there is no silica sand or rubber crumb to spread, top up or clean out of your gym.
Dense 6000 DTEX Yarn
About 69,300 stitches per square metre of 6000 DTEX yarn make a tightly packed surface built for repeated sled work.
Three-Layer Backing
PP cloth, mesh and black SBR latex lock the fibres in place and give the roll its weight, about 146 kg for a full 2 × 25 m roll.
Four Roll Sizes
Choose 1 m or 2 m wide, 12.5 m or 25 m long. Trim on site with a straightedge and a turf cutter to fit your space.
Loose-Lay or Glue Down
Roll it out on a flat, dry floor for home and light use, or bond it with turf adhesive for high-traffic commercial lanes.
Sled Resistance on This Turf
How heavy a sled feels depends on the surface as much as the load. These figures are indicative for this turf specification, scaled to a 150 kg loaded sled:
| Measure | What it means | Approx. value |
|---|---|---|
| Static friction | Grip to overcome before the sled moves | μ ≈ 0.24 |
| Starting force | Force to get the sled moving | ≈ 36 kgf |
| Dynamic friction | Drag once the sled is moving | μ ≈ 0.20 to 0.22 |
| Continuous force | Force to keep the sled moving | ≈ 30 to 33 kgf |
In practice, a 150 kg sled takes roughly a quarter of its weight in force to start and about a fifth to keep moving.
Indicative values only. Actual resistance varies with sled design, skid material, installation method, pile direction and speed.
Why 15 mm Pile?
Pile height changes how a sled behaves. At 15 mm, the turf is short enough for skids to glide and dense enough to stand up to repeated passes.
- Consistent drag — short fibres bend less under the skids, so resistance stays even from the first metre to the last.
- No infill to manage — at this height the pile supports itself, with no sand or rubber needed.
- Firm footing — a low pile gives shoes a stable surface for driving into a push, sprint starts and changes of direction.
- Hard-wearing — dense, short fibres are slower to mat down than long, loose pile.
- Easy to keep clean — dust and chalk sit near the surface, where a brush or vacuum can reach them.
Longer pile adds drag and tends to flatten along the sled line. 15 mm keeps the sled moving smoothly while still giving a true turf surface, which is why it is a common choice for indoor sled lanes.
Roll Sizes
| Size | Area | Approx. weight | Best for |
|---|---|---|---|
| 1 m × 12.5 m | 12.5 sqm | 37 kg | Single lane for home gyms and PT studios |
| 2 m × 12.5 m | 25 sqm | 73 kg | Wide lane, or two sleds side by side in a compact gym |
| 1 m × 25 m | 25 sqm | 73 kg | Single long lane for sprints and extended pushes |
| 2 m × 25 m | 50 sqm | 146 kg | Full factory roll for commercial gyms and performance centres |
Weights are approximate (±10%), worked out from the 146 kg factory roll. Any size can be trimmed on site with a straightedge and a heavy-duty turf cutter.
Built For
- Sled push and pull — the main job of the lane.
- Strength, conditioning and functional training — lunges, crawls, carries and drags.
- Hybrid fitness and race preparation — four lengths of a 12.5 m lane cover the 50 m sled push and pull of HYROX-style races.
- Sprint and agility drills — starts, shuttles and changes of direction.
- PT studios, commercial gyms and performance centres — as well as home gyms with the floor space.
The ATE Sled Turf Track is for indoor use only.
HYROX is a trademark of its owners; ATE is not affiliated with or endorsed by them.
ATE Sled Turf Track Specifications
| Product | ATE Sled Turf Track (indoor sled and sprint turf) |
| Pile Height | 15 mm |
| Yarn | 6000 DTEX (±10%) |
| Stitch Density | 69,300 stitches per m² (±10%) |
| Stitch Rate | 33 per 10 cm (±10%) |
| Gauge | 3/16 inch |
| Backing | PP cloth + mesh + black SBR latex |
| Colour | Light green |
| Infill | None required |
| Standard Factory Roll | 2 m × 25 m (50 sqm), approx. 146 kg (±10%) |
| Sizes Available | 1 × 12.5 m, 2 × 12.5 m, 1 × 25 m, 2 × 25 m |
| Markings | Supplied plain |
| Use | Indoor only |
| Warranty | 1 year against manufacturing defects |
Installation
Whichever method you choose, the base must be flat, clean, dry and firm before the turf goes down.
Loose-laid (home gyms and light use)
- Unroll the turf and let it settle flat before you trim it.
- Position the lane and cut it to length with a straightedge and turf cutter.
- Check that it lies flat with no ripples before loading a sled. If the lane shifts in use, move to an adhesive installation.
Adhesive (commercial and high-volume use)
- Dry-fit and trim the lane first.
- Apply artificial turf adhesive to the prepared base, following the adhesive maker’s coverage and curing instructions.
- Lay the turf into the adhesive, press it down from the centre outwards and keep sleds off it until the adhesive has cured.
Use an adhesive made for artificial turf and suited to your subfloor.
Lane Width and Edge Notes
2 m wide rolls may come with an open joining seam along one long edge, so a second roll can be joined to make a 4 m or wider area. For a single 2 m lane, trim the excess off during installation. It does not affect how the turf performs.
1 m wide lanes are cut from the 2 m roll, so allow a width tolerance of about ±3 mm when you measure the space.
Cleaning and Maintenance
- Sweep or vacuum the lane regularly to remove dust and chalk.
- Brush the pile from time to time to lift the fibres along the sled line.
- Clean spills with a mild detergent and water.
- Let the turf dry fully before training on it again.
- Check sled skids for burrs and sharp edges, which can cut the fibres.
Avoid solvents, bleach and wire brushes.
Packaging
The turf is supplied rolled, never folded. Unroll it soon after delivery and let it relax flat before installation.
- Covered: manufacturing defects in the turf construction and backing under normal indoor use, including abnormal separation of the backing.
- Expected wear: gradual flattening of the pile, visible traffic lines and changes in appearance with normal use are not defects.
- Not covered: damage from sharp or damaged sled skids, incorrect installation, accidental cuts, unsuitable chemicals and misuse.
Need a sled for the lane? See the ATE Weight Sledge Pro and the ATE Weight Sledge, or browse the full HYROX equipment range.
Frequently Asked Questions
What is the ATE Sled Turf Track?
The ATE Sled Turf Track is a 15 mm short-pile synthetic turf lane for indoor sled push and pull, sprints and functional training. It needs no infill, comes in four roll sizes from 1 × 12.5 m to 2 × 25 m, and can be loose-laid or glued down.
Does the turf need silica sand or rubber infill?
No. The dense 15 mm pile supports itself, so no silica sand or rubber infill is required. That keeps the lane cleaner and means there is nothing to top up.
What is the difference between the 1 m and 2 m widths?
A 1 m lane fits a single sled and suits home gyms and tight spaces. A 2 m lane gives more room either side of the sled, lets two athletes work side by side, and is the usual choice for commercial gyms.
Is it suitable for heavy sled training?
Yes. The turf is made for loaded sled push and pull. As a guide, a 150 kg loaded sled needs about 36 kgf to start and 30 to 33 kgf to keep moving. For heavy, high-volume use, glue the lane down and keep sled skids smooth and free of sharp edges.
Will the turf flatten with use?
Some flattening along the sled line is normal over time, as with any turf. Brushing the pile from time to time lifts the fibres and keeps the surface even.
Why is 12.5 m a standard length?
Four lengths of 12.5 m make 50 m, the sled push and pull distance in HYROX-style races, so you can train the full distance without a 50 m hall. It is also half of the 25 m factory roll and fits the floor space most gyms have.
Does the turf come with line markings?
No, it is supplied plain. If you want a centre line on a 2 m lane, a white line 30 to 50 mm wide in synthetic turf paint works well. Test the paint on a small patch first.
Can the Sled Turf Track be used outdoors?
No. The ATE Sled Turf Track is designed for indoor use only.
How is the turf installed?
On a flat, clean, dry and firm base. It can be loose-laid for home gyms and light use, or bonded with artificial turf adhesive for commercial and high-volume use. It can be trimmed on site with a straightedge and a heavy-duty turf cutter.
What warranty does the ATE Sled Turf Track come with?
It comes with a 1-year warranty against manufacturing defects in the turf construction and backing, including abnormal separation of the backing. Normal wear, and damage from sharp sled skids, incorrect installation, cuts or unsuitable chemicals, are not covered.
Does ATE deliver the Sled Turf Track across India?
Yes. ATE delivers the Sled Turf Track pan-India, with EMI options at checkout. Gyms and institutions can buy with B2B / GST invoicing.
The delivery time depends on the location of the consignee. The standard shipping time is approximately 8-10 days after the order has been placed.
Yes, we do delivery pan India
Shipping is handled by our expert logistics partners who ensures timely and safe delivery pan India. Different delivery locations are serviced by different logistics partners considering the delivery times across multiple partners.
Installation is done by our team of expert technicians who are located across the country. The technician located nearest to your delivery pin code will be scheduled for installation once the goods have been delivered.
We offer a wide range of commercial and home gym equipment including strength machines, functional trainers, barbells, squat racks, benches, rowers, treadmills, and more.
Yes, our equipment is designed with commercial-grade durability and safety, making it perfect for gyms, fitness studios, and training centers.
Absolutely. We stock spare parts for all our machines and offer easy ordering for components like cables, pulleys, pads, and pins etc.
Yes, flexible payment options and financing plans may be available. Please check at checkout or contact us directly.
